Oklahoma City, USA
BMS for EV Charging Station
A battery’s life is not over after it leaves a vehicle. Second-life batteries tend to have a strong state of health after they no longer can support the required range for the EV. Their re-use eliminates the strain on the environment by extending the EV battery’s lifespan. Nuvation Energy assisted Spiers in re-purposing used Nissan Leaf batteries for use in fast-charging EV charging stations to enable demand charge management and reduce the strain on the utility grid.
The BMS in an EV pack is not well suited for stationary energy storage applications. Where stationary storage tends to utilize the Modbus communications protocol, the EV pack uses CAN. Stationary systems also tend to be high voltage, whereas EVs are commonly low voltage. Spiers selected Nuvation Energy’s BMS for their repurposing effort because of the high quality of our utility-grade BMS and on site system integration support services.
- 400 V (dc) nominal stack voltage
- 57 kWh stack capacity
- Lithium Ion cell chemistry
- Tower contains 108 series cells
- The building block is 4 modules in parallel; each module is 2s2p of pouches internally
- Modules reclaimed from a Nissan Leaf battery pack
- Provides peak-shaving for electric vehicle charging stations
- UL 1642 certified
City Utilities Energy Storage
Electric Applications chose Nuvation Energy's battery management system to manage their 960 V DC 1 MW / 1 MWh grid-tied energy storage system. This lead-acid energy storage system was installed by City Utilities in…